TM 9-2350-267-10
COMMANDER’S SEAT - Continued
The commander’s seat assembly is very heavy. it
must be adequately supported before quick-release
pin (4) is removed. Failure to do so may result in se-
rious injury. Deployment of commander’s seat shall
always be a two-man operation.
2. Obtain an assistant to help support seat assembly and prevent footrest from swinging
freely.
3. While suppotting seat post and footrest, remove quick-release pin (4) and then re
move pin (5). Slowly lower seat assembly. Reinsert pin (5) into seat-stowage hole and
pin (4) into support bracket.
2-107
