INSTRUCTIONS FOR TESTING PATCH PANEL BOX A10 (cont)

INSTRUCTIONS FOR TESTING PATCH PANEL BOX A10 (cont) - TM-9-2350-261-34_67

INSTRUCTIONS FOR TESTING PATCH PANEL BOX A10

TM-9-2350-261-34 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
43

TM 9-2350-261-34 1. Remove cable W32, plug P7 (1) from TENT INTERFACE PANEL jack J8 (2), 2. Measure resistance between sockets on plug P7 (1) and pins on plug P107 (3) of cable W32 as follows: Socket A to pin A Socket N to pin N Socket B to pin B Socket P to pin p Socket C to pin C Socket R to pin R Socket D to pin D Socket S to pin S Socket E to pin E Socket T tO pin T Socket F to pin F Socket U to pin U Socket G to pin G Socket V to pin V Socket H to pin H Socket W to pin W Socket J to pin J Socket X to pin X Socket K to pin K Socket Y to pin Y Socket L to pin L Socket Z to pin Z Socket M to pin M Socket a to pin a 3. Does multimeter read 0 ohms for each measurement? 1. Verify no faults found. 1. Replace cable W32 (see your -20). 2. Verify no faults found. 2.1-24 Change 3

Privacy Statement
Press Release
Contact