TM 9-2350-261-20-4
REPLACE/REPAIR PORTABLE FIRE EXTINGUISHER MOUNT (M1068
0772 00
ONLY) -- Continued
DISASSEMBLY
Remove cotter pin (1), headed pin (2), and latch (3) from link (4). Discard cotter pin.
1.
Remove nut (5), lockwasher (6), and fixed arm assembly (7) with link (4) from bracket (8). Discard lockwasher.
2.
3.
Remove rivet (9) and link (4) from fixed arm assembly (7). Discard rivet.
Remove nut (10) and rod end connector (11) with movable arm assembly (12) from bracket (8). Then remove
4.
lockwasher (13) and nut (14) from connector. Discard lockwasher.
Remove rivet (15) and rod end connector (11) from movable arm assembly (12). Discard rivet.
5.
If lining (16), (17), or (18) on arm assembly (7) or (12) or bracket (8) needs to be replaced, drill out rivets (19) and
6.
remove lining. Discard rivets.
