TM 9-2350-261-20-4
REPLACE FOG OIL PUMP ASSEMBLY (M1059 ONLY) -- Continued
0705 00
INSTALLATION
1.
Install fog oil pump assembly (1) on fog oil tank (2). Secure with 12 screws (3), new lockwashers (4), and washers (5).
2.
Connect cable assembly (6) to fog oil pump cable assembly (7).
3.
Install two strainers (8) on pump assembly (1).
4.
Connect two fog oil hoses (9) to two strainers (8).
5.
Remove safety caps (10) from two fog oil hoses (11) and dust caps (12) from two quick disconnect couplings (13).
6.
Connect two fog oil hoses (11) to two quick disconnect couplings (13).
FOLLOW-THROUGH STEPS
Connect battery ground lead (WP 0294 00).
1.
Set circuit breaker CB1 to ON. See TM 3-1040-283-10.
2.
Raise and lock ramp (see your -10).
3.
4.
Stop engine (see your -10).
END OF TASK
0705 00-3/4 blank
