TM 9-2350-261-20-4
REPLACE M42 VENTILATED FACE MASK (VFM) GAS FILTER -- Continued
0693 00
INSTALLATION
NOTE
When positioning gas filter against bracket, ensure the air flow direction, as marked on gas
filter, is toward the VFM heaters.
Install bracket (1), two screws (2), new lockwashers (3), and washers (4) in mounting position.
1.
Place gas filter (5) into position against bracket (1), slide clamps (6) and (7) over bracket and gas filter. Tighten clamps
2.
securely.
Install coupling (8) and clamp (9) on gas filter (5). Tighten clamp securely.
3.
Install coupling (10) and clamp (11) on gas filter (5). Tighten clamp securely.
4.
FOLLOW THROUGH STEPS
1.
Raise and lock ramp (see your -10).
2.
Stop engine (see your -10).
END OF TASK
0693 00-3/4 blank
