TM 9-2350-261-20-4
REPLACE POST ASSEMBLY (M113A2 ONLY) -- Continued
0660 00
INSTALLATION
1.
Place post (3) under stud (5) in hull top. Lift bottom of post up as far as it will go.
2.
Lower bottom of post (3) into personnel seat bracket (4).
3.
Insert pin (2) through post (3). Turn end of pin down.
4.
Install and secure new spring pin (1) in pin (2).
FOLLOW-THROUGH STEPS
Raise and lock ramp (see your -10).
1.
Stop engine (see your -10).
2.
END OF TASK