TM 9-2350-261-20-1
1.
2.
Measure resistance between lead ends from circuit
breaker terminal
terminal 3 (2).
Does multimeter
17 (1) to indicator light
read 0 ohms?
1. Replace indicator light assembly (page 32-42).
2. Verify no faults found.
1. Remove heater harness plug (1) from heater control
box jack (2).
2. Measure voltage between heater control box jack (2)
pin C (3) and ground with HEATER switch on
START.
3. Does multimeter read at more than 17 volts?
1. Repair/replace faulty lead
(page 14-3).
2. Verify no faults found.
3 - 2 2 0
