TM 9-2350-261-10
TROUBLESHOOTING TABLE (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
COMMAND POST (M577A2, M1068) (cont)
41. TENT (COVERED EXTENSION) LIGHTS FAIL TO COME ON.
Step 1.
Step 2
Step 3.
Step 4.
Check to see if MASTER SWITCH is in OFF position.
Turn the MASTER SWITCH ON (page 2-163), (M577A2
only).
Check for loose connection of light cord at receptacle on rear
of earner, (M577A2 only).
Tighten connector.
Check for faulty bulbs, or loose or faulty switches or
electrical leads, (M577A2 only).
Connect disconnected leads.
(For M1068 only) See TM 10-5410-229-13&P for trouble-
shooting tent light set.
Record faulty items on form DA 2404 and notify unit
maintenance.
42. COMMANDER’S PLATFORM DOES NOT POSITION RIGHT.
Step 1. Check for bent handle, broken spring, or damaged pin
(page 4-11).
If any item is damaged, record it on form DA 2404 and
notify unit maintenance.
43. COMMANDERS PLATFORM CANNOT BE STOWED.
Step 1. Check for faulty latch or spring (page 4-11).
If platform is faulty, record it on form DA 2404 and notify
unit maintenance.
44. See TM 10-5410-229-13&P FOR TROUBLESHOOTING MCPS.
MORTAR CARRIERS (M106A2, M1064, AND M125A2)
45. BATTERY DRAWER DOES NOT STAY CLOSED.
Step 1. Check to see if locking handle is out of adjustment
(page 5-6).
Record fault on form DA 2404 and notify unit maintenance.
3-18.2
Change 3
