TM 9-2350-261-10
TROUBLESHOOTING TABLE (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TRANSMISSION (cont)
Add coolant as needed (page 3-43). Check for coolant leaks.
leaks are found, notify unit maintenance.
DIFFERENTIAL
10. DIFFERENTIAL HIGH OIL TEMPERATURE
COMES ON.
Step 1.
Step 2.
CAUTION
WARNING LIGHT
Do not operate the earner if the warning light comes on.
Check to see if differential oil level is low.
Add oil as needed (LO 9-2350-261-12).
Check to see if coolant level is low.
Add coolant as needed (page 3-43). Check for coolant leaks
leaks are found, record fault on form DA 2404 and report it
to unit maintenance.
TRANSFER GEARCASE
11. TRANSFER GEARCASE RUNS HOT OR NOISY.
Step 1. Check to see if transfer gearcase oil level is
Add oil to the transfer gearcase as needed
(LO 9-2350-261-12).
low.
12. NO POWER FLOWS THROUGH THE TRANSFER GEARCASE WHEN
THE ENGINE IS RUNNING.
Step 1. Check to me if engine disconnect lever is engaged.
CAUTION
Never try to move engine disconnect ever when engine is
running. Do not leave engine disconnected more than 10
minutes. Damage to transfer gearcase can result.
Engage the engine disconnect lever (page 2-167).
3-10
If
