ENGINE (cont) - TM-9-2350-261-10

TM-9-2350-261-10 Recovery Vehicle Full Tracked: Medium M88A1 NSN 2350-00-122-6826 Winch Power Takeoff and Hoist System Manual
Page Navigation
364

TM 9-2350-261-10 TROUBLESHOOTING TABLE (cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION step 6. step 7. step 8. ENGINE (cont) Remove any debris from intake grill, exhaust grill, and radia- tor fins. Check to see if coolant fan is operating properly. Look for loose or broken fan belts (page 2-118). If any belt is broken, worn, or loose, notify unit maintenance. Check to see if engine oil level is low. Add oil as needed (LO 9-2350-261-12). Check coolant fan drive system. Stop engine (page 2-184). Remove top rear power plant access Pull on coolant fan drive belt to see (page 2-118). If coolant fan does not turn, coolant ken. Do not operate carrier. Notify unit maintenance. panel (page 2-219). if coolant fan will turn fan drive system is bro- 7. ENGINE OIL LOW PRESS WARNING LIGHT COMES ON. step 1. step 2. CAUTION Operating carrier with ENGINE OIL LOW PRESS warning light on can damage engine. If ENGINE OIL LOW PRESS warning light does not go off within 10 seconds after engine starts, stop engine. Check to see if engine oil level is low. Add oil as needed (LO 9-2350-261-12). Check to see if engine is overheating. See ENGINE OVERHEATS (page 3-7). 3-8

Privacy Statement
Press Release
Contact