TM 9-2350-247-34
REPLACE ENGINE (M548A1) Continued
0007 00
27. Attach gauge (11) to governor (12) in adjusting position. Secure with two screws (13). Align hole in throttle arm (14)
with hole in gauge. Secure throttle arm.
28. Remove two screws (13) and gauge (11) from governor (12). Install gauge in operating position on governor. Secure
with two screws.
29. Install governor control link (15) on throttle arm (14) with screw (16) and nut (17).
30. Connect elbow (18) to tee (19).
31. Connect air box heater fuel supply hose (20) to tee (19).
0007 00-28