TM 9-2350-247-34
INSTALL AIR BRAKE KIT (M548A1) — Continued
0073 00
NOTE
Compressor pulley grooves are to be in the same plane as drive pulley grooves within 1/8 inch
(3.2 mm) total.
16. Remove pulley nut (11) from shaft of air compressor (3). Install compressor pulley (12), pulley key (13), pulley nut (11)
and cotter pin (14) on air compressor (3).
17. Install spacer (15), two compressor gaskets (16), and air compressor (3) on compressor platform (17) with four
washers (18), screws (19), and nuts (20).
0073 00-7
