TM 9-2350-247-34
INSTALL ENGINE COOLANT HEATER KIT (M548A3) — Continued
0062 00
13. Install circuit lead 402 (17) to coolant pump terminal (18). Secure with lock washer (19) and lock nut (20).
14. Install lead (21) and washer (22) on coolant pump terminal (23). Secure with lock nut (24).
15. Install bracket (25), two screws (26), lock washers (27) and nuts (28) on floor plate.
16. Install four grommets (29) in bracket (25).
17. Route hose (30) to coolant pump outlet up through grommet (29). Install hose and clamp (31) on outlet port elbow (16).
Tighten clamp.
18. Route hose (32) to coolant pump inlet up through grommet (29). Install hose and clamp (33) on inlet port elbow (15).
Tighten clamp.
0062 00-4
