TM 9-2350-247-34INSTALL ENGINE COOLANT HEATER KIT (M548A1) — Continued 0061 007. Install fuel pump (1) and heater ground strap (2) on heater mounting bracket (3) with two screws (4), six new lockwashers (5), and two nuts (6). Do not tighten forward screw and nut.8. Clean paint from surface of rubber strip (7). Coat one surface with rubber adhesive and position on sponson 1 inch (2.54cm) to left and 1 1/4 inches (3.18 cm) from rear of heater mounting bracket (3).9. Install coolant heater (8) on two saddles on mounting bracket (3) with two heater mounting clamps (9).10. Remove heater nut (10) from coolant heater (8). Install heater ground strap (2) on heater (8) with new lock washer (11)and nut (12).11. Install heater cover (13) on heater mounting bracket (3) with two cover mounting screws (14) and washers (15).0061 00-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
