TM 9-2350-247-34
REPAIR POWER PLANT SLING (M548A3) — Continued
0051 00
REPLACE DATA PLATE
1.
Remove four drive screws (3) from data plate (4). Remove data plate. Discard plate and screws.
NOTE
To order a new data plate, provide Depot with the same information contained on the original
data plate: Contract Number, Serial Number, Date of Manufacture, Maximum Work Load,
Proof Load, National Stock Number, Part Number, and Commercial and Government Entity
Code.
2.
Locate new data plate (4) in same location. Use the data plate as a template to drill four mounting holes 3/64 to 1/16 inch
(1.2 to 1.6 mm) diameter and 5/32 inch (4.0 mm) deep minimum.
3.
Install four new drive screws (3) on data plate (4).
0051 00-4
