TM 9-2350-247-34
REPAIR WINCH ENDFRAME ASSEMBLY (M548A1) — Continued
0041 00
6.
Install spring (11), poppet (12), bolt (13), and two nuts (14) in endframe housing (2).
7.
Install drag brake adjusting screw (15) in endframe housing (2).
8.
Install spring (16) and drag brake shoe assembly (17) in endframe housing (2).
9.
Press new sleeve bearing (18) into sleeve (19).
10. Position sleeve (19) with notch on installed bearing (18) facing toward yoke (5).
11. Install thrust ring (20) and sliding clutch (21) in endframe housing (2). Engage clutch with yoke (5).
0041 00-7
