TM 9-2350-247-34
REPAIR WINCH ENDFRAME ASSEMBLY (M548A1) — Continued
0041 00
DISASSEMBLY
1.
Remove sliding clutch (1), thrust ring (2), and sleeve (3), with sleeve bearing (4) installed, from endframe housing (5).
2.
Press sleeve bearing (4) from sleeve (3). Discard bearing.
3.
Remove drag brake shoe assembly (6) and spring (7) from endframe housing (5).
4.
Remove drag brake adjusting screw (8) from endframe housing (5).
5.
Remove two nuts (9), bolt (10), poppet (11), and spring (12) from endframe housing (5).
0041 00-4
