TM 9-2350-247-34
REPAIR TRACK TENSION ADJUSTER — Continued
0033 00
DISASSEMBLY
1.
Loosen bleeder valve (1). Push piston rod (2) in as far as it will go.
2.
Maintain inward pressure on piston rod (2) and rotate counterclockwise until piston rod rotates freely.
3.
Pull piston rod (2) from cylinder (3).
4.
Remove retaining ring (4), wiper ring (5), and packing (6) from cylinder (3). Discard packing, wiper ring, and
retaining ring.
5.
Press bearing (7) about 1 inch (25 mm) in cylinder (3) to force retaining ring (8) from groove in cylinder.
0033 00-2
