REPLACE TRANSFER GEARCASE (M548A1) Continued

REPLACE TRANSFER GEARCASE (M548A1) Continued - TM-9-2350-247-34_322

CHAPTER 9 DIRECT SUPPORT MAINTENANCE INSTRUCTIONS FOR WHEELS AND TRACKS

TM-9-2350-247-34 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
277

TM 9-2350-247-34 REPLACE TRANSFER GEARCASE (M548A1) — Continued 0031 00 5. Install differential pump (2) on drive gear (5). Secure with washer (8), nut (9), and new cotter pin (10). 6. Place new packing (11) on flange (12). 7. Install flange (12) on transfer gearcase. Secure with two screws (13) and new key washers (14). Tighten screws to 144-180 lb-in (16-20 N•m) torque. 8. Secure lever (15) on actuator (16) with new spring pin (17). 9. Install fan drive pulley (18) on secondary intermediate gear (19). Secure with screw (20), washer (21), and key (22). FOLLOW-THROUGH STEPS 1. Install transfer gearcase on engine (WP 0030 00). 2. Install transmission on transfer gearcase (WP 0027 00). 3. Install power plant in carrier (see your -20). 4. Fill transfer gearcase (see your -20). END OF TASK 0031 00-5/6 blank

Privacy Statement
Press Release
Contact