TM 9-2350-247-34
REPLACE TRANSMISSION (M548A1) — Continued
0028 00
6.
Apply a thin, even coat of primer and then sealing compound to cleaned external threads of elbows (6). Do not apply
primer or sealing compound beyond small end of threads.
7.
Install two new packings (7) and elbows (6) in transmission.
8.
Position range selector arm (8) on transmission shaft (9) with offset side of arm toward transmission and clamping screw
hole aligned with flat on shaft. Secure with screw (10) and nut (11).
9.
Position throttle valve arm (12) on transmission shaft (9) with offset side of arm away from transmission and clamping
screw hole aligned with flat on shaft. Secure with screw (13) and new lock nut (14).
FOLLOW-THROUGH STEPS
1.
Install transmission on transfer gearcase (WP 0027 00).
2.
Install power plant in carrier (see your -20).
3.
Fill transmission (see your -20).
END OF TASK
0028 00-5/6 blank
