TM 9-2350-247-34
REMOVE/INSTALL TRANSMISSION (M548A1) Continued
0027 00
REMOVAL
NOTE
If you need to replace the engine, transmission, or transfer gearcase, drain the oil from each
BEFORE power plant is removed from carrier.
Cap or cover openings where fuel, oil, or coolant lines or fittings have been removed.
1.
Remove two screws (1), washers (2), lock nuts (3), clamps (4), and power plant wiring harness (5) from bracket (6).
Discard lock nuts.
2.
Remove screw (7), lock nut (8), and governor lever (9) from bracket (10). Discard lock nut.
0027 00-2