TM 9-2350-247-34
REPLACE MAIN WIRING HARNESS — Continued
0025 00
11. Install six clamps (1), new lock washers (2), and screws (3) securing main wiring harness (4) to box beam on right side
of carrier.
NOTE
Two clamps and main harness on box beam next to battery box should be on right side of
weldnuts to eliminate interference with air cleaner assembly.
12. Install nine clamps (5), new lock washers (6), and screws (7) securing main wiring harness (4) to front section of
carrier hull.
13. Connect circuit 452 lead (8) to front bilge pump (9).
0025 00-14
