TM 9-2350-247-34
REPLACE MAIN WIRING HARNESS — Continued
0025 00
INSTALLATION
1.
Position main wiring harness in carrier, threading harness through opening in cab floor, and two taillight well openings.
2.
Install clamp (1), screw (2), new lock washer (3), and nut (4) securing main wiring harness (5) to hull.
3.
Install bushing (6) on main wiring harness and install bushing, two bushing retainers (7), screw (8), and nut (9) on hull.
4.
Connect circuit 23 lead (10) to trailer wiring harness.
5.
Connect circuit 21 lead (11), circuit 22 lead (12), and circuit 24 lead (13) to taillight-to-trailer receptacle wiring harness.
0025 00-12
