TM 9-2350-247-34
REPLACE RADIO RECEPTACLE/HEATER WIRING HARNESS — Continued
0024 00
12. Position radio capacitor (10), radio receptacle and heater wiring harness (5) and main wiring harness (13) on hull above
radio receptacle (1) and secure with capacitor clamp (14), two new lock washers (15) and screw (16).
13. Position circuit 400 and 400 A lead (17) on hull and secure with circuit 400 clamp (18) and screw (19).
14. If heaters are installed, connect circuit 400 and 400A lead (17) to vehicle compartment and engine coolant heater
control boxes.
FOLLOW-THROUGH STEPS
1.
Install batteries (see your -20).
2.
Install cab left floor plate (see your -20).
3.
Lower cab personnel center seat and driver’s seat (see your -20).
4.
Install instrument panel (WP 0018 00) or (WP 0019 00).
5.
Connect battery negative lead(s) (see your -20).
END OF TASK
0024 00-11/12 blank
