TM 9-2350-247-34
REPLACE RADIO RECEPTACLE/HEATER WIRING HARNESS — Continued
0024 00
REMOVAL
1.
If heaters are installed, disconnect circuit 400 and 400A lead (1) from vehicle compartment and engine coolant heater
control boxes.
2.
Remove circuit 400 clamp screw (2) and clamp (3) securing circuit 400 and 400A lead (1) to hull in cab.
3.
Remove capacitor clamp screw (4), two lock washers (5), and clamp (6) securing radio capacitor (7), main wiring
harness (8), radio receptacle and heater wiring harness (9), and radio capacitor (7) to hull. Discard lock washers.
0024 00-2
