TM 9-2350-247-34
REPAIR FAN DRIVE (M548A1) — Continued
0016 00
11. Install forward and rear fan drive belt adjusting linkage and adjust rod ends to show 2-3/8 inches (6.0 cm) of exposed
threads (see your -20).
12. Install forward fan drive belts (see your -20).
13. Add shims (3) under bracket (1) as required to get proper belt tension (tensioner in operating range).
14. Use straightedge to align front pulley (1) with pulley on fan within 1/8 inch (3.2 mm), and tighten two screws (5).
15. Install power plant (see your -20).
0016 00-7
