TM 9-2350-247-34
REPLACE ENGINE (M548A3) Continued
0008 00
12. Remove two screws (1), four washers (2), two washers (3), four mounts (4), two blocks (5), two washers (6) and two
lock nuts (7) from engine mount (8). Discard lock nuts.
13. Loosen lock nut (9) and rotate adjusting nut (10) to loosen fan drive belt. Remove belt.
14. Remove cotter pin (11) from pin (12). Discard cotter pin.
15. Remove pin (12) and adjustment screw assembly from bracket (13).
16. Remove lock nut (14), washer (15), screw (16) and idler arm (17) with adjustment screw assembly from bracket (18).
Discard lock nut.
0008 00-6