TM 9-2350-247-34
REPLACE ENGINE (M548A3) Continued
0008 00
8.
Disconnect power cable (31) and regulator cable (32) from regulator (33).
9.
Remove two screws (34), washers (35), two screws (36), washers (37) and bracket (38) with regulator from engine.
10. Remove six lock screws (39) and washers (40) from pulley (41). Discard lock screws.
11. Install three jack screws (3/8-16 X 1 inch MS90725-60) in threaded holes in pulley (41). Progressively tighten screws
and remove pulley.
0008 00-5