TM 9-2350-247-20-3
REPLACE TACHOMETER CABLE (M548A1) — Continued
0522 00
INSTALLATION
1.
Coat tachometer cable (1) with grease (WP 0128 00).
2.
Install tachometer cable (1) in tachometer cable housing (2) at instrument panel (3) end. Install gasket (4), if replaced, in
cable housing.
3.
Install slotted washer (5) and washer (6) on tachometer cable (1) at tachometer drive adapter (7) end of tachometer cable.
4.
Connect tachometer cable housing (2) to tachometer (8) on instrument panel (3).
NOTE
After completing this step, if material handling kit is installed, install bulkhead protector
(WP 0487 00).
5.
Connect tachometer cable housing (2) to tachometer drive adapter (7).
FOLLOW-THROUGH STEPS
1.
Install power plant rear access door (see your -10).
2.
Install instrument panel (WP 0256 00).
END OF TASK
0522 00-3/4 blank
