REPAIR HOIST ASSEMBLY Continued - TM-9-2350-247-20-3

REPAIR HOIST ASSEMBLY Continued - TM-9-2350-247-20-3_487

REPAIR HOIST ASSEMBLY Continued - TM-9-2350-247-20-3_489

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
406

TM 9-2350-247-20-3 REPAIR HOIST ASSEMBLY — Continued 0485 00 3. Install load sheave bearing (1) and driving pinion bearing (2) (with bearing lips facing out) into suspension frame (3). Press into place. 4. Install inner bearing retaining ring (4) in groove on driving pinion (5). Press driving pinion bearing (6) on splined end of driving pinion with bearing lip facing toward splines. Install outer bearing retaining ring (7) in groove of driving pinion. Use retaining pliers set. 5. Install driving pinion (5) with driving pinion bearing (6) into bore of suspension frame (3). Press driving pinion into driving pinion bearing (2) and driving pinion bearing (6) into bore of suspension frame. Use drive pin punch. 0485 00-8

Privacy Statement
Press Release
Contact