TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER WIRING HARNESS (M548A3)
Continued
0435 00
4.
Install clamp (5) on wiring harness (12). Secure clamp and ground lead (4) to hull weld nut with washer (13), new lock
washer (14), and screw (15).
5.
Connect wiring harness connector (3) to receptacle (2) on heater (1).
6.
Connect circuit 402 lead (17) to fuel pump lead (18).
FOLLOW-THROUGH STEPS
1.
Connect both battery negative leads (WP 0292 00).
2.
Check vehicle compartment heater for proper operation (see your -10).
3.
Install front access cover (WP 0391 00).
4.
Install M1A1-19 precleaner assembly (WP 0534 00).
5.
Install NBC manifold (WP 0533 00).
END OF TASK
0435 00-5/6 blank