TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER WIRING HARNESS (M548A3) —
Continued
0435 00
INSTALLATION
1.
Install wiring harness (12) and new grommet (16) in hull.
2.
Install three clamps (11) on wiring harness (12). Secure clamps to hull weld nuts with three washers (7) and screws (6).
NOTE
Position fuel filter on bracket on heater and tighten clamp.
3.
Connect wiring harness connector (8) to receptacle (10) on heater control box (9).
0435 00-4
