TM 9-2350-247-20-2
REPLACE PARKING BRAKE CONTROL LEVER/CABLE ASSEMBLY (M548A3) --
0346 00
Continued
9.
Remove two screws (1), washers (2), clamps (3) and cable (4) from carrier. Have helper assist.
INSTALLATION
1.
Route cable through hole in driver's compartment bulkhead, two clamps (3), and driver's compartment floor plate access
hole. Have helper assist.
2.
Install two clamps (3), washers (2), and screws (1) on carrier.
3.
Install jam nut (5) on cable (4).
4.
Install cable (4) in hole of lower mounting bracket (6).
5.
Install jam nut (7) on cable (4). Thread jam nut on cable until tight against lower mounting bracket (6).
