TM 9-2350-247-20-2
REPLACE TRANSFER GEARCASE MOUNTS (M548A1) -- Continued
0325 00
3.
Put caulking compound on threads of screw (6).
4.
Install left mount block (7), two left rubber mounts (8), and washers (9) between transfer gearcase and hull with screw
(6), two washers (10), and new lock nut (11). Tighten lock nut to 75-80 lb-ft (102-108 Nm).
FOLLOW-THROUGH STEPS
1.
Install power plant (WP 0130 00).
END OF TASK
0325 00-3/4 blank
