TM 9-2350-247-20-2
REPLACE TRANSMISSION RANGE SELECTOR LINKAGE (M548A1) -- Continued
0315 00
5.
Remove two screws (15) and lock washers (16) from range selector control (17). Remove control from bulkhead.
Discard lock washers.
6.
Remove selector arm spring pin (18) from range selector control arm (8) and range selector control shaft (19). Discard
spring pin.
7.
Remove spring pin (20) from range selector control shaft (19) and selector control shift lever (21). Remove shaft from
bearing (22), spring (23), lever, and range selector control (17). Discard spring pin.
8.
Remove four lock nuts (24) from screws (25). Remove two gear selector shaft bearings (26) from bulkhead. Separate
two bearings from gear selector shaft (4). Discard lock nuts.
0315 00-2