TM 9-2350-247-20-2
REPLACE TRAILER WIRING HARNESS -- Continued
0301 00
4.
Disconnect circuit 90 ground terminal (1) from bulkhead. Remove lock nut (2), lock washer (3), and screw (4) from
bulkhead below taillight mounting hole on carrier. Discard lock nut and lock washer.
5.
Remove four connector shells (5) from circuit leads 21 (6), 22 (7), 23 (8), and 24 (9). Remove four washers (10) and pull
shells from four contacts (11) on circuit leads.
6.
Disconnect connector (12) from bulkhead. Pull trailer wiring harness (13) through bulkhead. Remove spring (14).
7.
Disconnect connector (15) from tailgate.
8.
Remove four screws (16) that secure cover (17) and receptacle (18) to tailgate. Remove cover from tailgate.
9.
Pull trailer wiring harness (13) through tailgate.
0301 00-3