TM 9-2350-247-20-2
REPLACE FAN DRIVE BELTS (M548A1) -- Continued
0226 00
2.
Adjust fan drive belts:
a.
Loosen lock nut (6) on adjusting rod (7).
b.
Turn adjusting nut (8) to the right or left to get proper belt tension as shown on decal (9) and/or sleeve (10).
c.
Tighten lock nut (6).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Check fan drive belts for proper operation.
3.
Stop engine (see your -10).
4.
Install right seat (WP 0400 00).
5.
Lower center seat (see your -10).
6.
Install power plant rear access door (see your -10).
END OF TASK
0226 00-3/4 blank