TM 9-2350-247-20-2
REPLACE ENGINE TO BULKHEAD FUEL LINES AND FITTINGS (M548A1) -- Continued
0167 00
6.
Install elbow (1) and bushing (2) on fuel pump (3). Connect fuel inlet hose (4) to elbow.
7.
Install elbow (5) on engine. Connect fuel return tube (6) to elbow.
8.
Connect fuel return tube (6), new lock nut (7), two washers (8), and tee (9) to fuel return hose (10).
9.
Connect fuel inlet hoses (11) and fuel return hoses (10) at rear bulkhead. Use open end box wrench to tighten fuel return
hose nut to tee (9).
10. Secure fuel return (10) and fuel inlet (11) hoses to engine with two screws (12), new lock nuts (13), three clamps (14),
and strap (15).
0167 00-6