TM 9-2350-247-20-1
REPLACE AIR BOX DRAIN TUBES (M548A1)
0135 00
THIS WORK PACKAGE COVERS:
Removal (page 0135 00-1).
Installation (page 0135 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0541 00, Item 57)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground lead disconnected (WP 0292 00)
Hull bottom access cover removed (WP 0383 00)
REMOVAL
1.
Loosen two nuts (1) that secure two drain tubes (2) to each side of engine.
2.
Loosen three clamps (3) that secure hose (4) between right drain tube (2) and collector can (5).
3.
Remove two drain tubes (2) from air box. Remove hose (4) from crankcase breather collector can (5) through bracket (6).
INSTALLATION
1.
Place drain tube (2), with hose (4), on each side of engine. Secure with three clamps (3) and two nuts (1).
2.
Place ends of drain hose (4) through collector can (5) and bracket (6) into collector can.
0135 00-1
