TM 9-2350-247-20-1
REMOVE/INSTALL POWER PLANT (M548A1)
0130 00
THIS WORK PACKAGE COVERS:
Removal (page 0130 00-2).
Inspection-Acceptance and Rejection Criteria (page 0130 00-14).
Installation (page 0130 00-14).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0541 00, Item 57)
Beam Type Sling (WP 0541 00, Item 45)
Socket Wrench Set (WP 0541 00, Item 64)
Socket Wrench Set (WP 0541 00, Item 65)
Torque Wrench (WP 0541 00, Item 71)
Torque Wrench (WP 0541 00, Item 72)
Lifting device with rated lift capacity of at least 2500 lb
(1135 kg)
Materials/Parts
Antifreeze (WP 0542 00, Item 4)
Engine lubricating oil (WP 0542 00, Item 13)
GAA grease (WP 0542 00, Item 14)
Sealing compound (WP 0542 00, Item 37)
Gasket
Lock nut (2)
Suitable container
Washer (2)
Personnel Required
Unit mechanic
Helper (H)
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Both battery negative leads disconnected (WP 0292 00)
Neutral safety switch disconnected (WP 0308 00)
Machine gun mount kit removed, if equipped with
machine gun mount kit (WP 0513 00), (WP 0514 00),
and (WP 0515 00)
Fabric and/or fiberglass cab covers and frame removed
(WP 0418 00) and (WP 0456 00)
Top access cover and grilles removed (WP 0390 00)
Bulkhead protector removed, if equipped with material
handling kit (WP 0487 00)
Power plant rear access door removed (see your -10)
Cab personnel seats removed (WP 0398 00)
Cab floor plates removed (WP 0394 00)
Hull bottom access cover removed (WP 0383 00)
Air cleaner container and element removed
(WP 0152 00)
Air cleaner hose disconnected from engine air intake
(WP 0153 00)
Air cleaner filter indicator removed (WP 0154 00)
Air pump hose disconnected (WP 0191 00)
Transverse beam removed (WP 0384 00)
Cooling system drained (WP 0213 00)
0130 00-1
