TM 9-2350-247-20-1
CONNECT/DISCONNECT 200 AMP GENERATOR TEST KIT (M548A3)—Continued
0028 00
DISCONNECT
1.
Disconnect both battery negative leads (WP 0292 00).
2.
Disconnect ground lead (1) from terminal 6 (2) of test kit rheostat (3) and ground.
a.
Remove screw (4), lock washer (5), washer (6), ground lead (1) and ground lead (7) from voltage regulator
mounting plate (8).
b.
Install ground lead (7) on voltage regulator mounting plate (8) with washer (6), lock washer (5), and screw (4).
3.
Disconnect diagnostic test wiring harness (9) lead 2(10) from terminal 5 (11) of test kit rheostat (3).
4.
Disconnect diagnostic test wiring harness (9) plug (12) and plug (13) from plug (14) and plug (15).
5.
Connect plug (14) and plug (15) to voltage regulator (16).
6.
Connect both battery negative leads (WP 0292 00).
0028 00-4
