REMOVE/INSTALL CARGO COMPARTMENT FLOOR PLATES Continued

REMOVE/INSTALL CARGO COMPARTMENT FLOOR PLATES Continued - TM-9-2350-247-10_107

OPEN/CLOSE CARGO AREA (SECONDARY) VEHICLE COMPARTMENT HEATER KIT

TM-9-2350-247-10 Hull and Related Components Recovery Vehicle Full Tracked: Light Armored M578 (2360-00-439-6242) (EIC:3LA) Manual
Page Navigation
77

TM 9-2350-247-10 REMOVE/INSTALL CARGO COMPARTMENT FLOOR PLATES — Continued 0007 00 INSTALLATION NOTE For the high floor position, install seven support brackets on each sponson. For the low floor position, install four support brackets along the front of each sponson. Stow the other six support brackets on the hull crossmember. 1. Move floor plate support brackets to new positions and secure brackets with washers and screws. Use socket handle and socket. 2. Position floor plates on floor plate support brackets secure floor plates with 14 spacers and screws. Use socket handle and socket. 3. Install rear engine access panel. See task: REMOVE/INSTALL POWER PLANT REAR ACCESS COVERS/DOOR AND PANEL (WP 0036 00). 4. Install plywood protector, if removed. See task: REMOVE/INSTALL BULKHEAD PROTECTOR (WP 0078 00). END OF TASK 0007 00-3/4 blank

Privacy Statement
Press Release
Contact