|
| |
TM 9-2350-287-34
8-5. TRACK ADJUSTER REPAIR (continued).
5.
Install new preformed packing (4) and new scraper (3) in nut (5).
6.
Install new preformed packing (8) and two new retainers (7) on piston (6).
7.
Coat surface of piston (6) with grease, and slide piston (6) into cylinder (1).
8.
Install nut (5) over end of piston (6), and screw in and tighten nut (5) in end of cylinder (1).
9.
Install bleeder body (11) and bleeder plug (9) in cylinder (1).
10.
Remove cylinder (1) from vise.
FOLLOW-ON MAINTENANCE:
• None
8-12
|
