|
| |
17-20. HYDRAULIC RESERVOIR REPAIR
3.
4.
5.
6.
Remove six screws (40) and washers (39),
filter and cap assembly (41), filler flange (38),
two gaskets (36), and strainer (37) from access
cover (32). Discard filter and cap assembly.
Remove 14 screws (35), lockwashers (34),
and washers (33), access cover (32), and
gasket (31 ) from top of resevoir (5). Discard
Iockwashers and gasket.
Remove pipe (43) from access cover (32).
Remove elbow (7) and pipe bushing (42) from
access cover (32).
(continued).
7.
Remove filter (44) from nipple (45).
8.
Remove nippIe (45) from inside reservoir (5). Discard nipple.
17-52
TM 9-2350-287-20-2
|
