TM 9-2350-287-20-1
5-2. EXHAUST DUCT AND PIPE REPLACEMENT (continued).
a.
REMOVAL
1.
Remove two cotter pins (2), castle nuts (3), washers (5), springs (6), and screws (7) from flange (4). Discard
cotter pins.
2.
3.
4.
5.
Remove nut (9) and clamp (10) from exhaust pipe (8) and turbocharger (11).
Pull exhaust pipe (8) free of exhaust duct (1) and turbocharger (11).
NOTE
Powerpack must be removed before removing exhaust duct.
Disconnect two springs (15) from hanger (14), and remove exhaust duct (1) from vehicle.
Remove two screws (12) and washers (13) and hanger (14) from vehicle.
5-2