TM 9-2350-287-20-1
4-28. ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR REPLACEMENT
AND ADJUSTMENT (continued).
NOTE
Steps 17 through 20 cover adjustment of accelerator pedal.
17.
Loosen nut (71 ) and turn adjusting screw (72) to maximum depth.
18.
Depress accelerator pedal (62) until it stops, and hold in depressed position.
19.
Turn adjusting screw (72) until it lightly contacts and supports depressed accelerator pedal (62).
20.
Tighten nut (71) until it prevents adjusting screw (72) from turning.
NOTE
Steps 21 through 29 cover adjustment of transmission throttle valve.
21.
Remove lockpin (81), pin (80), and assembled rod (1) from bellcrank (49). Discard Iockpin.
22.
Hold accelerator pedal (62) in depressed position.
4-98