TM 9-2350-277-20-6
REPLACE M25/M25A1 HOSE ASSEMBLY (M981A3 ONLY) Continued
0907 00
INSTALLATION
1.
Install hose assembly (1) and clamp (3) on adapter (4) of each heater (5). Lock clamp (3).
2.
Install hose assembly (1) on each orifice connector assembly (2).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
4.
Check air flow of NBC System. Follow procedures in TM 3-6680-316-10.
END OF TASK
0907 00-2