TM 9-2350-277-20-6
REPLACE M25/M25A1 VFM GAS FILTER (M981A3 ONLY) Continued
0906 00
INSTALLATION
NOTE
When positioning gas filter against bracket, ensure the air flow direction, as marked on gas
filter, is toward the VFM heaters.
1.
Install bracket (1), two screws (2), new lockwashers (3), and washers (4) in mounting position.
2.
Place gas filter (5) into position against bracket (1), slide clamps (6) and (7) over bracket and gas filter. Tighten clamps
securely.
3.
Install coupling (8) and clamp (9) on gas filter (5). Tighten clamp securely.
4.
Install coupling (10) and clamp (11) on gas filter (5). Tighten clamp securely.
FOLLOW THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0906 00-3/4 blank