TM 9-2350-277-20-5
REPLACE COOLANT HEATER PUMP Continued
0731 00
FOLLOW-THROUGH STEPS
1.
Install coolant heater and pump unit(WP 0728 00).
2.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
3.
Fill carrier cooling system (WP 0227 00).
4.
Fill coolant heater system (WP 0710 00).
5.
Start coolant heater (see your -10). Check for leaks. Turn heater off.
6.
Close power plant access door (see your -10).
7.
Raise trim vane (see your -10).
END OF TASK
0731 00-4