WINCH ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION
Test Equipment/Special Tools:
General mechanic's tool kit (item 52, Appx B)
Soft-jawed vise (item 40, Appx B)
Lubricating grease (item 27, Appx D)
Wiping rag (item 50, Appx D)
TM 9-2350-267-10
REMOVAL
WARNING
I
A
B
c
If winch cable (1) is supporting weight of carrier (2), do
step B. Falling carrier (2) could cause serious injury.
NOTE
If winch cable (1) is connected to, but not supporting
carrier (2), do step B. If not go to step C.
Lower carrier (2) to vehicle floor by slowly playing out winch cable (1) (TM
9-2350-267-10).
Remove quick-release pin (3) from winch cable clevis (4) and disconnect
cable (1) from carrier (2).
Remove four screws (5), four flat washers (6), and four lockwashers (7) that
secure winch bracket (8) to stacker support (9). Discard lockwashers.
12-32.1
Change 4
TM 9-2350-267-20